Product category
Turbidity/Total Suspended Solids
Online turbidity and TSS meters and sensors for drinking water and wastewater, with self-cleaning wipers and Modbus output. Supplied by LKS in Malaysia.
5 products
All products5 Turbidity/Total Suspended Solids products
Turbidity/Total Suspended SolidsWMTB1001 Turbidity MeterView details- Turbidity/Total Suspended SolidsWMTS1001 TSS MeterView details
Turbidity/Total Suspended SolidsWSTB1002 High Range Turbidity SensorView details
Turbidity/Total Suspended SolidsWSTB1003 Low Range Turbidity SensorView details- Turbidity/Total Suspended SolidsWSTS1001 TSS SensorView details
About this range
Turbidity/Total Suspended Solids
Turbidity and total suspended solids (TSS) instruments measure how much particulate matter is carried in water, by detecting how the sample scatters light. Turbidity is reported in NTU and shows clarity, while TSS is reported in mg/L or g/L and shows the solids load. Drinking water plants, wastewater treatment operators and power plants use turbidity and TSS monitoring to control filtration, settling and discharge. LKS (M) Sdn. Bhd. supplies online turbidity and TSS instruments from TGI German Technologies in Malaysia.
Our range
- WSTB1003 low range turbidity sensor: flow-through, 90° light scattering, 0–20.00 NTU, for drinking water and pure water.
- WSTB1002 high range turbidity sensor: in-situ infrared scattering up to 4000 NTU with a self-cleaning wiper and SS316L body.
- WSTS1001 TSS sensor: in-situ infrared scattering with ranges up to 120,000 mg/L and a wiper on a settable cleaning interval.
- WMTB1001 turbidity meter: an online panel meter with 0.0–20 NTU or 0.00–10000 NTU ranges, alarm relays and Modbus RTU.
- WMTS1001 TSS meter: an online meter for suspended solids up to 120 g/L, storing one month of history.
Applications
- Drinking water after filtration or membrane treatment
- Pure water systems
- Sewage and wastewater treatment
- Settling and clarifier performance checks
- Power plant water systems
- Effluent discharge monitoring
How to choose
- Use a low-range turbidity sensor for clean water and a high-range or TSS sensor for wastewater.
- Decide between flow-through installation and in-situ immersion in a tank or channel.
- Choose sensors with a wiper where fouling is likely.
- Pair the sensor with a meter if you need a local display, relays or 4–20 mA output.
LKS can match sensor and meter, install them and calibrate the system on site. Contact our engineers to plan your turbidity or TSS measurement.
- Supply & selection advice
- Installation & commissioning
- On-site calibration
- Maintenance & support
Get in touch
Need a quote or technical advice?
Tell us about your application and our engineers will recommend the right instrument or system.
- 01Share your applicationProcess, medium, range and site conditions.
- 02Engineer recommendationWe match the right instrument or system to your process.
- 03Quotation and supportSupply, installation, calibration and after-sales service.