Product category
Single Parameter Gas Analyzer
Single parameter gas analyzers for mercury, VOC and laser extractive measurement in stacks and process lines, with Modbus outputs. Supplied by LKS in Malaysia.
4 products
All products
About this range
Single Parameter Gas Analyzer
A single parameter gas analyzer is dedicated to one measurement, such as mercury or total volatile organic compounds, rather than a full suite of flue gases. Plants add one when a specific pollutant must be tracked continuously, or when a process stream needs a reliable reading of a single component. These analyzers work alongside dust monitors and multigas analyzers within a continuous emission monitoring system. LKS (M) Sdn. Bhd. supplies and commissions single parameter gas analyzers for power, chemical and oil and gas sites in Malaysia.
Our range
- Mercury gas analyzer GHg: cold vapour atomic fluorescence spectrophotometry (CV-AFS) for elemental, ionic and total gaseous mercury, with a detection limit down to 0.05 µg/m³.
- VOC gas analyzer FID (GFID): separates volatile organic compounds on a heated chromatographic column and detects them by flame ionisation, from 0.01 to 1000 ppm as methane.
- VOC gas analyzer LK-1000F: a compact photoionisation (PID) analyzer with a built-in suction pump, measuring 0 to 6000 ppm in an IP66 weatherproof panel.
- Laser extractive gas analyzer GLE: a flameproof bypass-type tunable laser analyzer, rated Ex d IIC T6 Gb, for gas that is too hot, wet, dusty or pressurised for in-situ measurement.
Applications
- Mercury monitoring of power plant stack emissions
- VOC monitoring in chemical processing plants
- Oil and gas facilities and other hazardous areas
- On-line process analysis in small pipes or harsh sample conditions
- Adding a dedicated parameter to an existing CEMS
How to choose
- Identify the target compound and the concentration range you must cover.
- Consider sample conditions: high temperature, humidity, dust or pressure point towards an extractive design.
- Check whether the installation is in a hazardous area and needs a flameproof analyzer.
- Confirm the output needed by your data system; several models provide RS485 Modbus RTU.
For help matching a gas analyzer to your stack or process line, speak to the LKS engineering team about selection, installation and calibration.
- Supply & selection advice
- Installation & commissioning
- On-site calibration
- Maintenance & support
Get in touch
Need a quote or technical advice?
Tell us about your application and our engineers will recommend the right instrument or system.
- 01Share your applicationProcess, medium, range and site conditions.
- 02Engineer recommendationWe match the right instrument or system to your process.
- 03Quotation and supportSupply, installation, calibration and after-sales service.