Gas Sampling Probes

JES-301 Heated Gas Sampling Probe 230V 50/60Hz

Comes with weather protection enclosure and thermal isolation, made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm. Heated element up to 180°C controlled by a digital temperature controller with isolated status and alarm contacts and over temperature limiter. Material; SS316, Viton, Ceramic. Mounting Flange DN65/PN6 with G 3/4" female, sample gas outlet: NPT 1/8", power supply: 230V 50/60Hz, 505W 

JES-301B Heated Gas Sampling Probe 230V 50/60Hz

Weather protection enclosure and thermal isolation, made of stainless steel SS316 with bonded silicon carbide filter element, surface coated, pore size 0.2µm, heated up to 180°C controlled by digital temperature controller with isolated status and alarm contacts and over temperature limiter. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8", back purge port with non return valve and SS316 bulkhead fitting 6mm, Material: SS316, Viton, Ceramic; Power Supply: 230V 50/60Hz, 505W

JES-301C Heated Gas Sampling Probe 230V 50/60Hz

Comes with weather protection enclosure and thermal isolation, made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm, electrically heated up to 180°C controlled by a digital temperature controller with isolated status/alarm contacts and over temperature limiter, calibration gas port with non return valve, opening pressure 0.7bar. Material; SS316, Viton, Ceramic. Mounting Flange DN65/PN6 with G 3/4" female, sample gas outlet: NPT 1/8", calibration gas inlet: SS316 bulkhead fitting 6mm, power supply: 230V 50/60Hz, 505W 

JES-301BC Heated Gas Sampling Probe 230V 50/60Hz

Comes with weather protection enclosure and thermal isolation, made of stainless steel SS316 with electrically heated external surface coated ceramic filter element, pore size 0.2µm, heated up to 180°C controlled by a digital temperature controller with isolated status and alarm contacts and over temperature limiter. Mounting Flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8", blow back port with non return valve and SS316 bulkhead fitting 6mm, calibration gas port with non return valve, opening pressure 0.7bar and SS316 bulkhead fitting 6mm, Material: SS316, Viton, Ceramic; power supply: 230V 50/60Hz, 505W 

JES-301H Heated Gas Sampling Probe 230V 50/60Hz

Comes with weather protection enclosure and thermal isolation, made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm. Heater element, temperature sensor and junction box for termination. Material; SS316, Viton, Ceramic. Mounting Flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8", power supply: 230V 50/60Hz, 505W, external temperature controller required.

JES-301BH Heated Gas Sampling Probe 230V 50/60Hz

Weather protection enclosure and thermal isolation, made of stainless steel SS316 with bonded silicon carbide filter element, surface coated, pore size 0.2µm, heated up to 180°C, temperature sensor and junction box for termination of external temperature controller. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8", back purge port with non return valve and SS316 bulkhead fitting 6mm, Material: SS316, Viton, Ceramic; Power Supply: 230V 50/60Hz, 505W

JES-301CH Heated Gas Sampling Probe Junction Box and Calibration Port

Weather protection enclosure and thermal isolation, made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm, heated up to 180°C, RTD PT100 temperature sensor and junction box, calibration gas port (raw gas) with non return valve. Material: SS316. Mounting flange DN65/PN6 with sample gas inlet G 3/4" female thread, sample gas outlet: NPT 1/8", calibration gas inlet: bulkhead fitting 6mm, external temperature contoller required. Power Supply: 230V 50/60Hz, 505W

JES-301G Steam Heated Sampling Probe

Made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8". Steam heating connections: Pipe stubs ID6/OD8mm.

JES-301BG Steam Heated Sampling Probe *Included Back Purge Port

Made of stainless steel SS316 with bonded silicon carbide filter element, surface coated, pore size 0.2µm. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8". Steam heating connections: Pipe stubs ID6/OD8mm. Back purge port with non return valve and bulkhead fitting 6mm

JES-301CG Steam Heated Sampling Probe *included Calibration Gas Port

Made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8". Steam heating connections: Pipe stubs ID6/OD8mm. Calibration Gas Port with non return valve and bulkhead fitting 6mm

JES-301BCG Steam Heated Sampling Probe *included Back Purge Port and Calibration Gas Port

Made of stainless steel SS316 with bonded silicon carbide filter element, surface coated, pore size 0.2µm. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8". Steam heating connections: Pipe stubs ID6/OD8mm. Back purge and calibration gas port with non return valve and bulkhead fitting 6mm

JES-301GV Steam Heated Sampling Probe with Process Shut-Off Valve

Made of stainless steel SS316 with bonded silicon carbide filter element, pore size 2µm. Mounting flange DN65/PN6 with G 3/4" female thread, sample gas outlet: NPT 1/8". Sample gas inlet with shut off valve. Steam heating connections: Pipe stubs ID6/OD8mm.

JES-301W Unheated Sampling Probe

Made of stainless steel SS316 with bonded silicon carbide filter element, probe size 2µm. Gasket made of Viton, mounting flange DN65/PN6 with G 3/4"female thread for sampling pipe. Sample gas outlet: NPT 1/8"

JES-301WZ Unheated Sampling Probe

Made of stainless steel SS316 with bonded silicon carbide filter element, probe size 2µm. Mounting flange 2"ANSI, with G 3/4" female thread, Material: SS316, Viton, Ceramic, Sample Gas Outlet: NPT 1/8"

JES-301K Heated Gas Sampling Probe, 230V - Back Purge Controller Control Unit for Backpurge

Glass fiber enclosure IP65 tubed and wired, PLC Controller for blow back control, 2 solenoid valves, 2 PG16 cable glands instrument air inlet/outlet: SS316 bulkhead fitting 6mm, power: 230V 50/60Hz